Process of Backup Camera Factory :
The backup camera factory in your sake camera is connected. You unplugged it from the original connector to prevent any type of all. There is no short writing, but wire this in your original camera. It would help if you walked the Radio, and they would help you see your original camera. Let them show you it’s aiming up into the sky right now. But there you go, and your kid likes to use it by pressing a button here or every time you go into reverse. If you can go ahead and switch you just had to do this option because of the Radio. That you have, so what you did here is the connector right? You’ll go to your camera video cable and tap into the white and yellow wire; this is how it connects one to the white one to the yellow one. So this was for the video, so when you cut this cable, they will grind one, and one will be video.
The one of these you forgot to erase, but If you think the yellow is the video, white is Ground. So wear them accordingly, and then if you have, if you see where they have the platform, which is ground. They are ready for power, so the ground is connected. The red one is connected to power, so this cable runs to the phone. Because that’s how you connected, it runs to the front. It’s connected to one of your fuses, giving power every time you buy the ignition is On. So that whenever you need to back up, you know their camera always has Power. This one is the one that tells the head unit to switch whenever you place it into reverse. Because it’s going to get to your reverse light. So how you have it hooked up, their camera always has power, which is why you hooked it up. This is because you drive forward whenever you have a head unit on and the same.
Power of Backup Camera :
If you could press upon it, it would show the backup camera without going to reverse. If you are able to do that because you have this constant power every time. The car is on another way to do this is, let’s say, you connect your power to that reverse light, the same as the trigger wire. So whenever you back up into the reverse right, you put in to put your car into reverse light. The lights are going to come out with turn on it’s got some send power to the camera and power to the trigger. The wire to sing the signal to your Radio shows the backup camera factory, but now, because of your Radio, you are allowed to do it two ways.
The right by the system allows them to switch to a backup camera or go to reverse. So If you have a set up both ways so, when you are going to reverse light turns on. Since part two, the trigger wire sensor to the head unit puts it on the reverse, or, say, you are driving; you don’t have to put it into reverse. Since this is constant power because it’s connected to the front of your car, suppose you could press the head unit up.